Question: “I just had a granite tile floor installed a couple of days ago. After several times cleaning the floor with water, I observed a few marks which I couldn’t remove. The marks looked like grout or mortar stain and a clear mark. What … Continue reading How Do I Remove Grout Haze/Marks From Black Granite Floor?
We recently found this while teaching one of our stone restoration classes and wanted to share it. The stone industry owes a lot to Maurizio, and we miss him everyday! Enjoy 🙂
Regular stone surfaces are known for their beauty, but sometimes standard stone is a bit dull and in need of some enhancement. That is where stone color enhancers come into play. The right color enhancer gives stone a more glossy and vibrant look. It can take a standard looking surface and turn it into something that stands out. Not only does the color enhancer improve the look of the stone, it also protects the surface against staining as well.
Test Out The Stone Color Enhancer
It is important to test the enhancing chemicals on a spare piece of stone before using them on the rest of the finished surface. During the test phase, it is important to pay attention to the amount of the product applied, as well as, how long it remains in place after the application. Going through the tests helps ensure that the desired effect is achieved. It is not an exact process, and always requires a small amount of experimenting before the final application is made.
Treat Stone Materials
While stone surfaces can look just fine without treatment, choosing the right stone color enhancer brings out the natural colors of the stone while also protecting them from the elements. We offer several color enhancers that will give the stone a nice “wet” look without the shine.
Best Stones To Use It On
A good color enhancing sealer works best on a semi-porous stone surface. Stones such as granite, marble, and travertine all accept the stone color enhancer readily and benefit from the sealing properties that it has to offer. Stone that is not porous usually does not take enhancer very well, and will not require a seal most of the time. When the type of stone is not known, it is important to have a professional identify it. If that is not convenient then it is best to test a small amount of solution on a piece of stone before attempting to finish the entire surface. Note—perform a water test to see what the stone will look like after applying the enhancer. Pour a palm size amount of water on the stone and let dwell for 20-30 minutes. The darkening of the stone will show you what the stone will look like once the enhancer is applied.
For more information regarding our products please visit us at www.mbstonecare.com
The MB-25 HydroOxy is a multi-purpose cleaner with oxygenated peroxide and fortified with high performance solvents and surfactants. This unique blend of oxygen boosted surfactants and cleaners means it will safely clean and de-grease the toughest soils. Unlike other peroxide cleaners, it has a neutral … Continue reading MB25 HydroOxy Multi-Purpose Cleaner
Question: The home we just moved into has a travertine shower. The tile on the floor of the shower has a white “film” over it. I assume it is etched. Do you have a product that will remove this? Or do I need a professional? … Continue reading How Do I Remove “White Film” From My Travertine Tile Floor Shower
Question: Hello. I recently used your etching remover kit (MB-11, MB-5, MB-13) to remove some water/etching spots and then polish my existing Venetian engineered marble countertops and shower. I know we are supposed to seal Venetian marble annually. I wanted to ask is your MB-13 … Continue reading Question Regarding Marble Care Products
Question: “I have a shiny black countertop in my bathroom that I’ve damaged by setting a bottle of Drano on top of it. It has left a discolored outline of the bottom of the bottle on the stone. The area is lighter than the countertop, so … Continue reading How Do I Fix Dull Marks On My Black Granite Vanity?